Specifications:
1pc HDMI splitter 1 × 2+1pc Power DC5V/1A
Input Video Signal: 0.5 – 1.0 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Max Single Link Range: 1920X1080,1080P
Output Video: HDMI 1.3+HDCP1.0/1.1/1.2
Resolutions DTV/HDTV: 480p/576i/576p/720p/1080i/1080P
HDMI Version: HDMI 1.3
Operating Frequency: Up to 225MHz
EIDI Duration: 4 seconds
Power supply: DC 5V
CONNECTION:
>onnect the input source and output displays to the HDMI Splitter .
*Please refer to the Connection Image.
> Connect the DC 5V power supply to the splitter. Please kindly note
that power supply with higher voltage may damage the splitter.
> When input source and output displays are connected and turned
on, the corresponding LED will light.
>Attention: In order to protect the splitter and your devices, p lease
make sure the splitter is powered off before you attach
in or extract video source and displays . Please insert
and extract HDMI cables gently.
INTERFACE:
① Power LED
② Power Supply Socket
③ HDMI Input
④ LED of HDMI Input
⑤ HDMI1 Output
⑥ LED of HDMI1 Output
⑦ LED of HDMI2 Output
⑧ HDMI2 Output
FAQ:
A )
The splitter doesn’t appear to be functioning.
Firstly, check if the LED lights, if the power supply is in good condition and well connected.
Secondly, make sure all cables are in good condition and well connected.
Thirdly, make sure the length of the cables is within the maximum
supported length of this splitter. Lastly, please try to connect the input
source to the display directly to see if it display normally.
B )
If the maximum resolution the two displays supported is not the same,
what resolution be displayed?
The splitter will display at the lower one to both displays.
