HDMI Extender

STR100-HBT

STR100-HBT

HDMI Extender over Cat5e/Cat6 (HD BaseT)

Features:

> POE(Power Over Ethernet)function is supported, either TX or RX is powered by24V@1A power supply, another does not need power from the DC jack. POE Power consumption is less than 10W. See the description 1
>Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distance transmission.
> UTP cable termination follows the standard of IEEE-568B.
>Transmission distance: ※Over CAT6 cable
100 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
70 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit;
3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.
> Support display resolutions up to 4K x 2K@30Hz
Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels,
3D 1080P60Hz and 4K x 2K@30Hz@24bit
> Transfer Bidirectional Infrared control signal together with the HDMI signal. 
 Specifications
1.Frequency Bandwidth,297MHz[10.2Gbps]
2.Transmitter Input/Output Ports,1x HDMI Female port/1xCAT6
1x IR Tx/1x IR Rx
3.Receiver Input/Output Ports,1xHDMI Female port/1xCAT6 ,1x IR Tx/1x IR Rx
4.Power Supply,DC 24V 1A
5.ESD Protection,± 8kV (air-gap discharge)
Human Body Model:± 4kV (contact discharge)
6.Dimensions (mm),65(W) X 100 (D) X 25 (H)
7.Weight:200g x 2
8.Operating Temperature:0°C ~ 40°C / 32°F ~ 104°F
9.Storage Temperature:-20°C ~ 60°C / -4°F ~ 140°F
10.Relative Humidity:20~90% RH (Non-condensing)
11.Power Consumption (Max):10W
Operation controls and Functions
Transmitter

1.DC IN: Plug the 24V DC power supply into the unit.
2.IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
3.IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx.
4.HDMI IN: HDMI input port. This slot is where you connect the HDMI source.
5.HD BaseT OUT: Standard HD BaseT signal output port. Connect HD BaseT receiver with a UTP cable following the standard of IEEE-568B.
6.LINK LED: The connection status indicating lamp.
※Illuminate: The Transmitter and Receiver are in good connections
※Flashing: The Transmitter and Receiver are in poor connections
※Dark: The Transmitter and Receiver are in no connections
 
Receiver

1. DC IN: Plug the 24V DC power supply into the unit.
2.IR IN: Channel 1 IR Receiver. Connect with Wideband IR Rx.
3.IR OUT: Channel 2 IR Transmitter. Connect with Wideband IR Tx.
4.HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable.
5.HD BaseT IN: Standard HD BaseT signal input port. Connect HD BaseT transmitter with a UTP cable following the standard of IEEE-568B.
6.LINK LED: The connection status indicating lamp.
※   Illuminate: The Transmitter and Receiver are in good connections
※   Flashing: The Transmitter and Receiver are in poor connections
※   Dark: The Transmitter and Receiver are in no connections
 ※ Description 1     
POE(Power Over Ethernet) Application Example

※ Description 2     
Bidirectional Infrared control Application Example

Application Example


Class Date Title Download