HDMI Extender

STR70-HBT

STR70-HBT

4K HDMI Extender(HD BaseT)
Features:
> POE(Power Over Ethernet)function is supported, either TX
   or RX is powered by24V@1A power supply, another does not
   need power from the DC jack. POE Power consumption is less
   than 10W. ※ See the description 1
>Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable
  to achieve long distance transmission.
>U TP cable termination follows the standard of IEEE-568B.
> Transmission distance: ※Over CAT6 cable
   ·70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit;
   ·40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit;
    3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit.
> Support display resolutions up to 4K x 2K@30Hz
> Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@
   24 bit/pixels,
  3D 1080P60Hz and 4K x 2K@30Hz@24bit
> Transfer Bidirectional Infrared control signal together with the
    HDMI signal. ※ See the description 2.
Specifications:
1pc HDMI Extender Transmitter+1pc HDMI Extender Receiver+
2pcs Wideband IR TX+2pcs Wideband IR RX+1pc 24V1A DC Power
Supply+4pcs Mounting ears
Frequency Bandwidth: 297MHz[10.2Gbps]
Transmitter Input/Output Ports: 1x HDMI Female port/1xCAT6
1x IR Tx/1x IR Rx
Receiver Input/Output Ports         : 1xHDMI Female port/1xCAT6
                     1x IR Tx/1x IR Rx
Power Supply:  DC 24V 1A
ESD Protection: ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)
Dimensions (mm): 65(W) X 100 (D) X 25 (H)
Weight: 200g x 2
Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity: 20~90% RH (Non-condensing)
Power Consumption (Max): 10W




Operation controls and Functions:
Transmitter

①DC IN: Plug the 24V DC power supply into the unit.
②IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
③IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx.
④HDMI IN: HDMI input port. This slot is where you connect the
                    HDMI source.
⑤HD BaseT OUT: Standard HD BaseT signal output port. Connect
                                 HD BaseT receiver with a UTP cable following the standard of IEEE-568B.
⑥LINK LED: The connection status indicating lamp.
※Illuminate: The Transmitter and Receiver are in good
connections
※Flashing: The Transmitter and Receiver are in poor 
connections
※Dark: The Transmitter and Receiver are in no
connections

Receiver

①DC IN: Plug the 24V DC power supply into the unit.
②IR IN: Channel 1 IR Receiver. Connect with Wideband IR Rx.
③IR OUT: Channel 2 IR Transmitter. Connect with Wideband IR Tx.
④HDMI OUT: HDMI output port. This slot is where you connect the
                         HDTV or monitor with HDMI cable.
⑤HD BaseT IN: Standard HD BaseT signal input port. Connect HD
                             BaseT transmitter with a UTP cable following the
                             standard of IEEE-568B.
⑥LINK LED: The connection status indicating lamp.
※  Illuminate: The Transmitter and Receiver are in good
                          connections
※  Flashing: The Transmitter and Receiver are in poor 
                        connections
※  Dark: The Transmitter and Receiver are in no
                 connections



※ Description 1 
POE(Power Over Ethernet) Application Example

※ Description 2       
Bidirectional Infrared control Application Example

 
Class Date Title Download
Datasheet 2017-06-16 70-HBT