Specifications:
1pc HDMI Extender Transmitter+1pc HDMI Extender Receiver+
1pc IR Transmitter+1pc IR Receiver+1pc 5V DC Power Supply
adaptor
Frequency Bandwidth: 2.25Gbps (single link)
HDMI Transmitter Input/Output Ports: 1x HDMI Female port/1 x CAT6
HDMI Receiver Input/Output Ports: 1 x HDMI Female port/1 x CAT6
Power Supply: DC 5V~12V
ESD Protection: ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)
Dimensions (mm): 65(W) X 100 (D) X 25 (H)
Operating Temperature: 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity: 20~90% RH (Non-condensing)
Operation controls and Functions:
HDMI Extender Transmitter
Front Panel Rear Panel
①Power：Plug the 5V~12VDC power supply into the unit and connect
the adaptor to AC wall outlet.
②RESET: Factory reset button. When the Receiver system functions have
been changed, Pressing this button for 10seconds can realize factory reset.
③IR OUT：Remote control signal transmit，connect the IR transmit cable
with HDMI Extender Transmitter．The IR transmit cable face to the IR
receiver of the Source．
④HDMI：HDMI Input port.
⑤CAT6 OUT: Connect the CAT 5E/6 output of the Transmitter with the CAT
5E/6 input of the HDMI over single CAT6 receiver.
⑥LED indicator: When the DC power on, the indicator will be light.
HDMI Extender Receiver
Front Panel Rear Panel
①Power: Plug the 5V~12VDC power supply into the unit and connect the
adaptor to AC wall outlet.
②RESET: Factory reset button. When the Receiver system functions have
been changed, Pressing this Button for 10seconds can realize factory
reset.
③IR IN: Remote control signal Receive，connect the IR receive cable
with HDMI Extender Receiver．
④HDMI Out: HDMI output port
.
⑤CAT6 IN: Connect the CAT6 in of the receiver with the CAT6 input of
the HDMI over single CAT6 transmitter.
⑥LED indicator: When the DC power on, the indicator will be light.
