HD Video Surge Protector

Specifications:
Temperature:-40℃～70℃；
Relative humidity：≤95%；
Atmospheric pressure：70kPa～106 kPa.

Nominal working voltage Un	5V
Max continuous operation voltage Uc	6V
Nominal discharge current In（8/20ms）	5KA
Max discharge current Imax（8/20ms）	10KA
Protection level Up（ 10/700/ms）	＜20V
Insulation resistance MΩ	≥0.4
Insertion loosed dB	≤0.5
Bandwidth FG	(0.3~13)M
Transmission rate Vs	10 M
Response time Ta	≤1ns
Interface type（optional ）	BNC( K/K)
Protection level	IP20

Installations, Use and Maintenance:   

1 Installation steps
* Before connecting the protector to the system, Make sure
   check grounding resistance and conform to the criteria with
   the requirements;
* Connect the protector to the front of the device firmly.  
* Use the short and thick grounding lines as possible as you can
   to connect with the Earth-termination system.
2 Note:
* There are IN and OUT icons marked on the protector, and
   the OUT port should be connected with the protected device,
   please don’t make mistake. Or it will cause damage to the
   protector, and also the device can’t be protected as expect.  
* Due to sockets connected interface factors caused the loss
   of poor, should be replace the protector or maintenance.
* Users Can’t removes the fasteners part of the device, in order
   to avoiding damage and affect the normal work.


 
Product appearance: