Specifications:
1pc HDMI Extender Transmitter+1pc HDMI Extender Receiver+
2pcs Wideband IR TX+2pcs Wideband IR RX+1pc 24V1A DC Power
Supply+4pcs Mounting ears
Frequency Bandwidth: 297MHz[10.2Gbps]
Transmitter Input/Output Ports: 1x HDMI Female port/1xCAT6
1x IR Tx/1x IR Rx/1xPhoenix
Receiver Input/Output Ports : 1xHDMI Female port/1xCAT6
1x IR Tx/1x IR Rx/1xPhoenix
Power Supply: DC 24V 1A
ESD Protection: ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)
Dimensions (mm): 65(W) X 115 (D) X 17 (H)
Weight: 200g x 2
Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity: 20~90% RH (Non-condensing)
Power Consumption (Max): 20W
Operation controls and Functions:
Transmitter
①POWER: This LED illuminates when the device is connected with
power supply.
②DC 24V: Plug the 24V DC power supply into the unit.
③HD BaseT OUT: Standard HD BaseT signal output port. Connect HD
BaseT receiver with a UTP cable following the
standard of direct interconnection method.
④HDMI IN: HDMI input port. This slot is where you connect the HDMI
source.
⑤IR IN: Channel 2 IR Receiver. Connect with Wideband IR Rx.
⑥IR OUT: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
⑦RS232: Phoenix jack provide Serial port control signal from receiver or to
receiver.
⑧Connection Signal Indicator Lamp
※Illuminate: The Transmitter and Receiver are in good connections status.
※Flashing: The Transmitter and Receiver are in poor connections status.
※Dark: The Transmitter and Receiver are not connected.
⑨Data Signal Indicator Lamp
※Illuminate: The HDMI signal with HDCP.
※Flashing: The HDMI signal without HDCP.
※Dark: No HDMI signal.
Receiver
①POWER: This LED illuminates when the device is connected with power supply
②DC 24V: Plug the 24V DC power supply into the unit.
③HD BaseT IN: Standard HD BaseT signal input port. Connect HD BaseT transmitter
with a UTP cable following the standard of direct interconnection
method.
④HDMI OUT: HDMI output port. This slot is where you connect the HDTV or monitor
with HDMI cable.
⑤IR IN: Channel 1 IR Receiver. Connect with Wideband IR Rx.
⑥IR OUT: Channel 2 IR Transmitter. Connect with Wideband IR Tx.
⑦RS232: Phoenix jack provide Serial port control signal from receiver or to receiver.
⑧Connection Signal Indicator Lamp
※Illuminate: The Transmitter and Receiver are in good connections status.
※Flashing: The Transmitter and Receiver are in poor connections status.
※Dark: The Transmitter and Receiver are not connected.
⑨Data Signal Indicator Lamp
※Illuminate: The HDMI signal with HDCP.
※Flashing: The HDMI signal without HDCP.
※Dark: No HDMI signal.
※ Description 1
POE(Power Over Ethernet) Application Example
※ Description 2
Bidirectional Infrared control Application Example
※ Description 3
Bidirectional RS232 control Application Example
Application Example